Usage Instructions

BEFORE USE, CAREFULLY READ THE DIRECTIONS AND ACT ACCORDINGLY

• PRE-TREATMENT:

The surface should be clean, dry and free of Grease. Remove loose old lacquer and rust and sand the surface. Apply a layer of primer suitable for the surface. After drying, sand the base layer with sandpaper (Grain 600).

• TREATMENT:

The surface should be clean, dry and free of Grease. The container should have room temperature. Best processing temperature is around 10 to 25 C.

• BEFORE USE:

For Aerosol, shake the Aerosol for 2 Minutes and Spray a sample.

For Spray Gun, spray a sample.

Distance to the surface to be treated approximately 25 to 30 centimeters.

• Apply the lacquer in several thin layers. If using Aerosol, before applying the next layer, again shake the Aerosol
• In order to obtain high gloss, apply a finishing coat of clearcoat.
• The drying time depends on the ambient temperature, the humidity of the air and the thickness of the lacquer applied.